CNC G COD

 

سی این سی مشین پر استعمال ہونے والے جی کوڈ کی تفصیل نیچے دی گئی ہے ۔ شکریہ

G-codes for milling in Fanuc, LinuxCNC, GRBL, and Haas dialects۔ how to program CNC machines using the g-code.

G-CODES👇

▶G00 Move in a straight line at rapids speed.
▶G01 Move in a straight line at last speed
▶G02 Clockwise circular
▶G03 Counter-clockwise circular
▶G04 Dwell: Stop for a specified time
▶G05 FADAL Non-Modal Rapids
▶G09 Exact stop check
▶G10 Programmable parameter input

▶G15 Turn Polar Coordinates OFF
▶G16 Turn Polar Coordinates ON
▶G17 Select X-Y plane
▶G18 Select X-Z plane
▶G19 Select Y-Z plane
▶G20 Program coordinates are inches

▶G21 Program coordinates are mm
▶G27 Reference point return check
▶G28 Return to home position
▶G29 Return from the reference position
▶G30 Return to the 2, 3, and 4th reference point

▶G32 Constant lead threading
▶G40 Tool cutter compensation off
▶G41 Tool cutter compensation left
▶G42 Tool cutter compensation right
▶G43 Apply tool length compensation .plus
▶G44 Apply tool length compensation .minus
▶G49 Tool length compensation cancel
▶G50 Reset all scale factors

▶G51Turn on scale factors
▶G52 all coordinate systems: add XYZ offsets
▶G53 Machine coordinate system
▶G54 Work coordinate system (1 Workpiece
▶G55 Work coordinate system (2 Workpiece
▶G56 Work coordinate system (3 Workpiece
▶G57 Work coordinate system (4 Workpiece
▶G58 Work coordinate system (5 Workpiece
▶G59 Work coordinate system (6 Workpiece

▶G61 Exact stop check mode
▶G62 Automatic corner override
▶G63 Tapping mode
▶G64 Best speed path
▶G65 Custom macro simple call
▶G68 Coordinate System Rotation
▶G69 Cancel Coordinate System Rotation

▶G73 High speed drilling cycle
▶G74 Left hand tapping cycle
▶G76 Fine boring cyle

▶G80 Cancel canned cycle
▶G81 Simple drilling cycle
▶G82 counterboring
▶G83 Peck drilling cycle
▶G84 Tapping cycle
▶G85 Boring canned cycle, no dwell
▶G86 Boring canned cycle, spindle stop
▶G89 Boring canned cycle, dwell, feed out

▶G90 Absolute programming of XYZ (type B and C systems)
▶G90.1 Ab programming IJK (type B & C systems
▶G91Incremental programming of XYZ (type B & C systems
▶G91.1In programming IJK (type B & C systems
▶G92Offset coordinate system and save parameters
▶G92 (alternate)Clamp of maximum spindle speed
▶G92.1Cancel offset and zero parameters
▶G92.2Cancel offset and retain parameters
▶G92.3Offset coordinate system with saved parameters
▶G94Units per minute feed mode. Units in inches or mm.
▶G95Units per revolution feed mode. Units in inches or mm.
▶G96Constant surface speed
▶G97Cancel constant surface speed
▶G98Return to initial Z plane after canned cycle
▶G99Return to initial R plane after canned cycle

بلاگ پر آنے کا شکریہ مزید معلومات کے لئے ہمارے ساتھ رہیے
شکریہ thanks