PLANNER MACHINE

 

Working principal of planner machine..

The machine is the idea of relative instrument work movements. Response of the apparatus or work and the sluggish, irregular cross over feed movements are bestowed to the work or instrument by the quick straight way cutting movement.

Al the activities done in arranging machines should be possible in the forming machine. Stroke length, bigger size, and higher inflexibility empower the arranging machines to perform all the more weighty responsibility work on huge positions and their long surfaces.

It produces planes and level surfaces with a solitary point cutting device. A planer machine is huge and monstrous when contrasted with a shaper machine. The planer can do machining substantial workpiece, which is impossible on a shaper surface.

Planer Machine Definition:

Planer Machine is a machine where undesirable material is sliced from the workpiece to deliver a level surface on the workpiece. In contrast to Shaper Machine, in this machine, beyond what one instrument can be set and play out an activity.

Planer Machine Parts:

Bed:

The bed of a planer having cross ribs like box-like projecting. It is weighty in weight and exceptionally enormous in size likewise it upholds the segment and moving pieces of the machine.

The bed is made commonly more than the length of the table, double the length. So the full length of the table may across it. To help the table guideways might be given on an exceptionally enormous machine.

The guideways ought to be flat and corresponding to one another. The guideways are greased up appropriately and to guarantee a nonstop and satisfactory stockpile of oils in present day machines, oil under tension is siphoned into the various parts

Section.

The lodgings additionally called sections like vertical designs set on each side of the bed and are connected to the sides of the bed. They are intensely motorized to proceed with serious powers because of cutting.

Cross rail might be made to slide all over for obliging various statures of work to the front substance of each lodging is precisely machined to give accuracy ways.

Two side-apparatus head additionally slide upon it. Planer lodging encases the Crossrail raising screw, vertical and crossfeed screws for apparatus heads, counterbalancing weight for the Crossrail.

The planer screws can be worked by hand or force.

Table:

The table of the planer backings the workpiece and responds alongside the methods of the bed. The planer table is a weighty rectangular projecting that has T-spaces gave on the whole length of the table so the work and work expecting gadgets connected to remember.

Eventually, an empty space is left which goes about as a transporter for gathering chips. Works can likewise settle upon the box of the planer.

The table is comprised of one single projecting however it is isolated by the table of planer there are two separate tables mounted upon the bed ways.

Water driven guards are connected to the furthest limit of the bed to prevent the table from overwhelming that will give the padding impact. On the off chance that the table overwhelms, a huge cutting instrument darted along the underside of the table which will take a profound cut on a replaceable square engrossing the motor energy of the moving table.

Cross Rail:

The Crossrail is a projecting that interfaces the two lodgings. Crossrail gives unbending nature to the machine. It involves the substance of the lodging and can be braced at the situation by manual, pressure driven gadgets.

The Crossrail when clipped ought to remain totally corresponding to the top surface of the table, for example It should be level regardless of its position.

Two device heads are mounted which are called railhead. It has screws for vertical and crossfeed of the apparatus heads and a screw for lifting the rail. The planer screws can be worked by hand or force.

Device Head:

Device head is a segment collected to saddle, which has the instrument post in it. The apparatus present is joined on the head so that on to and from of the table the cutting device power is raised.

The forefront of the instrument will be saved as of being harm and allows the programmed supply to work with no interruption.

It has Saddle, Swivel base, Vertical Slide, Apron, Clapper box, Clapper block, Toolpost, Down feed screw, Apron, clasping fastener, Apron turning pin, Mechanism for cross and down-feed of the device.

Driving and Feed Mechanism:

The taking care of instrument of the device head is by the hand of force in a transversely or a vertical way. The drive instrument is situated under the table and The engine drive is at one side of the planer.

The size of the planer is indicated by the most extreme length of the stroke and it is likewise determined by the biggest rectangular size that can be machined.

پلیر مشین کی تعریف:

پلیر مشین کے حصے:

پلانر مشین ورکنگ اصول:

پلیر مشین ورکنگ ویڈیو:

پلیر مشین میکانزم:

پلیر مشین کی اقسام:

پلیر مشین کے فوائد:

پلیر مشین کے نقصانات:

پلیر مشین کی درخواست:

پلیر مشین کا تعارف:

پلاننگ مشینوں میں کی جانے والی تمام کاروائیوں کو شکل دینے والی مشین میں کیا جاسکتا ہے۔  اسٹروک کی لمبائی ، بڑے سائز اور زیادہ سختی کی وجہ سے منصوبہ بندی کی مشینیں بڑھے بڑھے workpiece  اور ان کی لمبی سطحوں پر زیادہ ہیوی ڈیوٹی کا کام کرسکتی ہیں۔

یہ فلیٹ سطحیں تیار کرتا ہے۔  ایک شپر مشین کے مقابلے میں پلانر مشین بڑی اور بڑے پیمانے پر ہوتی ہے۔  منصوبہ ساز بھاری workpiece مشینی کر سکتے ہیں ، جو شیپر سطح پر نہیں کیا جاسکتا ہے۔

پلیر مشین کی تعریف:

پلیر مشین ایک مشین ہے جس میں مواد کو workpiece سے کاٹ کر workpiece پر فلیٹ سطح تیار کیا جاتا ہے۔  شپر مشین کے برعکس ، اس مشین میں ، ایک سے زیادہ ٹولز مرتب کرکے ایک آپریشن کر سکتے ہیں۔

اب ہم پلانر مشین کی تعمیر یا حصے دیکھیں ،

پلیر مشین کے حصے:

مندرجہ ذیل تعمیراتی یا پلیر مشین کے اہم حصے ہیں:

Bed

Column or Housing

Table

Cross Rail

Tool Head

Driving

Feed Mechanism

Planer Machine

پلانر مشین ورکنگ اصول:

ورک ٹیبل منتقل ہوسکتا ہے اور مشین کا ٹول ہیڈ اسٹیشنری پوزیشن میں ہے۔  ورک پیس ورک میز پر طے کی گئی ہے اور

سنگل پوائنٹ کاٹنے کا آلہ ٹول ہیڈ سے منسلک ہے اور اب ہم مشین پر سوئچ کرتے ہیں جس کا مطلب ہے کہ مشین کو بجلی کی فراہمی اور ورک ٹبل آگے بڑھے۔

لہذا یہ مواد کو کاٹتا ہے اور اسے کاٹنے کا اسٹروک کہتے ہیں۔  ورکٹیبل نیچے کی طرف چلتا ہے وہاں مادوں کی کوئی کٹائی  نہیں ہوتی ہے لہذا اسے ریٹرن اسٹروک کہتے ہیں۔  اس عمل کو جاری رکھا جائے گا جب تک کہ آپ بجلی کی فراہمی یا دیگر کو تبدیل نہیں کرتے ہیں۔